Injin Mai Na'urar Cika Ta atomatik Layin Injin Lakabi

Injin Mai Na atomatik Cika Layi na Lakabi na Injin Featured Hoto

Takaitaccen Bayani:

Wannan layin cika mai na lube ya haɗa da cikawa, capping, na'ura mai alama har ma na iya ƙara unscrambler kwalban, da injin kwalin kwali idan an buƙata. Yana iya zama cikakken layi na atomatik daga A zuwa Z.

Aika mana imel

Cikakken Bayani

Bidiyo

Jawabin Abokan ciniki

Tarihin ciniki

Takaddun shaida

Tags samfurin

Injin cikawa

Dubawa

Ana amfani da wannan na'ura don cike samfuran ruwa daban-daban, kamar mai, abin sha, da sinadarai da dai sauransu muddin ruwanta. Yana ɗaukar famfo mai cike da piston tare da motar servo wanda ya fi daidai kuma mai sauƙin daidaita ƙarar.

Siga

Shirin	Lube mai cike layin
Ciko kai	2, 4, 6, 8, 10, 12, 16 da dai sauransu (na zaɓi bisa ga gudun)
Cika ƙarar	1-5000ml da dai sauransu (na musamman)
Saurin cikawa	200-6000 bph
Cika daidaito	≤± 1%
Tushen wutan lantarki	110V / 220V / 380V / 450V da dai sauransu (na musamman) 50/60HZ
Tushen wutan lantarki	≤1.5kw
Matsin iska	0.6-0.8MPa
Cikakken nauyi	450kg

Spindle capping inji

Siffofin
'mota ɗaya tana sarrafa dabaran capping ɗaya', wanda zai iya tabbatar da injin yayi aiki a tsaye da kuma ci gaba da jujjuyawar ƙarfi a ƙarƙashin yanayin aiki na dogon lokaci.
Sauƙi don aiki.
Mitsubishi PLC da kula da allon taɓawa, mai sauƙin aiki.
Ana iya daidaita bel ɗin riko daban don daidaitawa da kwalabe daban-daban.
Idan an sanye da na'urar jagora, injin zai iya rufe iyakoki.
Masu mulki akan kowane sassa masu daidaitawa don yin daidaitawar "bayyane".
Ƙimar wutar lantarki na zaɓi ne don tabbatar da daidaiton juzu'i.
Motar sama-ƙasa zaɓi ne don sanya injin ya tashi sama da ƙasa ta atomatik.

Aluminum foil induction sealing inji

Siffofin
Sauƙi don amfani da sarrafa microprocessor.
Babban inganci, ƙarancin wutar lantarki da tsawon rayuwar sabis.
Tsayin layin rufewa mai daidaitawa don karɓar faɗin kewayon tsayin kwalba.
Wutar lantarki ta halin yanzu, jujjuyawar wutar lantarki da kariya ta wuce gona da iri.
Zane-zanen kayan masarufi yana rage girman kiyayewa da haɓaka aminci.
Gine-ginen bakin karfe gabaɗaya don amfani a cikin yanayi mai tsauri da sauƙi don tsabta da kulawa.

Injin lakabin gefe biyu

Gabatarwa

Ana amfani da wannan na'ura mai lakabin gefe guda biyu don yiwa lakabin kwalabe na lebur ko murabba'i da kwalabe masu zagaye. Yana da tattalin arziki, kuma mai sauƙin aiki, sanye take da allon taɓawa na HMI & Tsarin Kula da PLC. Gina cikin microchip yana yin saurin daidaitawa da sauƙi da canzawa.

Ƙayyadaddun bayanai

Gudu	20-100bpm (wanda ke da alaƙa da samfur da alamomi)
Girman kwalban	30mm≤ nisa≤120mm;20≤tsawo≤400mm
Girman lakabin	15≤ nisa≤200mm,20≤tsawo≤300mm
Saurin fitar da alamar alama	≤30m/min
Daidaito (ban da akwati da kuskuren alamar)	± 1mm (ban da akwati da kuskuren lakabi)
Kayan lakabi	Stiker kai, ba m (idan a bayyane yake, yana buƙatar ƙarin na'ura)
Diamita na ciki na nadi	76mm ku
Diamita na waje na nadi	A cikin 300 mm
Ƙarfi	500W
Wutar Lantarki	AC220V 50/60Hz guda-lokaci
Girma	2200×1100×1500mm

Injin tattara kaya na katon

Tsarin aiki

1. Tsarin buɗaɗɗen kwali zai buɗe kwali ta atomatik kuma yana yin gyare-gyare. Rufe ƙasan katon sannan aika zuwa tasha ta gaba.
2. The ƙãre kwalban za a shirya bisa ga kartani shiryawa da ake bukata, da kuma samun zuwa kwali shiryarwa tsarin.
3. Cibiyar kulawa ta aika da siginar zuwa tsarin kwalin kwali, kwalban jira za a jefa a cikin kwali, an gama shirya kwali.
4. Za a aika da katakon da aka gama zuwa tashar ta gaba don na'urar rufe katako.

Bayan sabis na tallace-tallace

1. Bada ƙwararrun jagorar aiki
2. Tallafin kan layi
3. Bidiyo goyon bayan fasaha
4. Kyauta masu kyauta a lokacin garanti
5. Filin shigarwa, ƙaddamarwa da horarwa
6. Sabis na kula da filin